How On-Site Nitrogen Generation Works: A Step-by-Step Guide

In many industrial and manufacturing settings, maintaining a reliable supply of nitrogen is essential. An on-site nitrogen generator allows you to produce nitrogen gas right at your facility, eliminating the need for tank and N2 cylinder deliveries. Below, we’ll break down exactly how on-site nitrogen generation works, step by step, and highlight its benefits for your operation.

What Is an On-Site Nitrogen Generator?

An on-site nitrogen generator is a system that separates nitrogen from ambient air and delivers it at a specific purity, pressure, and flow rate. Instead of depending on nitrogen deliveries, these systems generate nitrogen gas on demand using compressed air as the feed source.

The two primary technologies used for on-site nitrogen generation are Pressure Swing Adsorption (PSA) and membrane separation. Both systems deliver consistent nitrogen output, but each functions differently depending on purity requirements, operating costs, and maintenance needs.

Why Choose On-Site Nitrogen Generation?

There are several compelling reasons businesses across industries are switching to on-site nitrogen generation. Once installed, operating costs are significantly lower than recurring cylinder or bulk delivery expenses. Nitrogen is always available on demand, ensuring uninterrupted operations even during supply chain delays. Producing gas on-site also minimizes waste because nitrogen is generated as needed, not stored and discarded. These systems are compact, freeing up valuable floor space, and they’re safer and more environmentally friendly by reducing truck deliveries and emissions. Lastly, modern nitrogen generators feature built-in analyzers that allow you to maintain precise nitrogen purity levels for your applications.

Step-by-Step: How On-Site Nitrogen Generation Works

Step 1: Air Preparation

The process starts with compressed, dry, and clean air. The air passes through filters that remove particulates, oil vapor, and moisture. High-quality feed air ensures longer system life and consistent nitrogen output.

Step 2: Pressure Regulation

The clean air is adjusted to the operating pressure needed for nitrogen separation. Proper pressure control ensures steady flow and optimal purity.

Step 3: Nitrogen Separation

This is the core of the system, where nitrogen is separated from oxygen and other gases using either PSA or membrane technology.

In a Pressure Swing Adsorption (PSA) system, air enters a vessel filled with carbon molecular sieve (CMS). Oxygen molecules are adsorbed while nitrogen passes through as product gas. When the adsorbent becomes saturated, the vessel depressurizes and regenerates while a second vessel takes over. This cycle continues to provide a consistent flow of high-purity nitrogen gas. PSA systems are ideal for industries that require very high nitrogen purity levels.

In a Membrane Separation system, compressed air passes through membrane fibers that selectively allow oxygen, carbon dioxide, and water vapor to pass through more quickly than nitrogen. The nitrogen remains as the primary output, creating a continuous stream of gas suitable for moderate-purity applications..

Step 4: Purity Monitoring

An oxygen analyzer continuously measures nitrogen purity to ensure the gas meets your specified standards. If oxygen levels increase beyond the set limit, the system automatically adjusts flow or timing to maintain consistency.

Step 5: Delivery to Application

The purified nitrogen is delivered directly to process lines, storage tanks, or other end-use points. Because the system operates on-site, nitrogen is always available without the downtime or logistics associated with deliveries.

Step 6: Venting and Regeneration

In PSA systems, oxygen-rich exhaust gases are vented safely to the atmosphere during regeneration. This allows the adsorbent material to be reused in the next cycle. Proper venting design ensures safe and efficient operation.

Step 7: Maintenance and Optimization

Routine maintenance keeps the system performing at peak efficiency. This includes replacing filters, checking for leaks, calibrating sensors, and monitoring performance metrics. With proper care, nitrogen generators can operate efficiently for decades.

PSA vs. Membrane Nitrogen Generators

Both PSA and membrane nitrogen generators have unique strengths depending on your purity needs and application. PSA nitrogen generators can achieve extremely high purity levels—up to 99.999%—making them ideal for industries like electronics, pharmaceuticals, and metal processing. They have more complex components and require a bit more maintenance but deliver the highest performance where precision matters most.

Membrane nitrogen generators, on the other hand, provide purities up to around 99.5% and are simpler, more compact, and energy-efficient. They’re excellent for applications where moderate purity levels are sufficient. With fewer moving parts and straightforward operation, membrane systems are an economical, low-maintenance solution for continuous nitrogen supply.

Real-World Process Overview

Installing an on-site nitrogen generator typically begins with assessing your facility’s nitrogen demand, including desired flow rates, purity levels, and pressure requirements. The generator modules are then installed and connected to your compressed air and power systems. Once operational, sensors are calibrated, and the system begins its separation cycle. Operators can monitor purity and make adjustments as needed, while ongoing maintenance keeps performance optimized for years to come.

How On Site Gas Systems Can Help

For more than 35 years, On Site Gas Systems has been helping companies around the world gain control over their nitrogen supply with reliable, cost-effective on-site generation solutions. Whether you need a high-purity PSA system or a low-maintenance membrane setup, our engineers can design and build a custom nitrogen generator tailored to your exact specifications.

Contact On Site Gas Systems today to learn how on-site nitrogen generation can improve efficiency, reduce costs, and give your business a steady, independent nitrogen supply.

SPEC YOUR SYSTEM TALK TO AN EXPERT CONTACT US
/0 Comments/by

Environmental Impact: On-Site Nitrogen Generation vs. Delivered Nitrogen

As businesses look for ways to reduce their carbon footprint and operate more sustainably, the choice of how you source industrial gases matters. Nitrogen is essential across industries—food packaging, electronics manufacturing, pharmaceuticals, and more—but how you get your nitrogen can make a significant environmental difference.

Here’s a closer look at the environmental impact of on-site nitrogen generation compared to delivered nitrogen, and why producing your own nitrogen often proves to be the greener choice.

Understanding the Two Options

Traditionally, companies have relied on delivered nitrogen—either in high-pressure cylinders or as nitrogen transported in large tanks. While this approach may seem convenient, it involves energy-intensive production at off-site plants and significant transportation to get the gas to your facility.

By contrast, an on-site nitrogen generation system produces nitrogen directly from ambient air using membrane or PSA (Pressure Swing Adsorption) technology. Instead of relying on repeated deliveries, you generate only the nitrogen you need, exactly when you need it.

Lower Carbon Footprint from Reduced Transportation

One of the biggest environmental advantages of on-site generation is the dramatic reduction in transportation emissions. Delivered nitrogen requires frequent truck deliveries to your facility—sometimes multiple times per week—each trip burning fuel and producing greenhouse gases. On-site systems eliminate these recurring deliveries. Fewer trucks on the road mean lower CO₂ emissions and less wear on local infrastructure.

Energy Efficiency and Reduced Waste

Large plants that produce nitrogen consume vast amounts of energy to generate nitrogen gases. Every liter of nitrogen delivered to your site represents a significant upfront energy cost. On-site nitrogen generators, especially modern PSA and membrane systems, typically use only the energy needed to compress and separate the air. This localized process is far less energy-intensive overall.

Additionally, delivered nitrogen often involves partial cylinder returns or product loss from venting, which wastes both nitrogen and the energy used to produce it. Generating nitrogen on-site produces only what you use, helping eliminate unnecessary waste.

Smaller Environmental Footprint from Packaging and Handling

Delivered nitrogen requires cylinders, pallets, protective wrapping, and other packaging materials—many of which have limited reuse cycles and eventually end up as waste. With an on-site nitrogen generation system, these materials are no longer part of your supply chain. That translates to less landfill waste and fewer resources consumed in manufacturing and recycling cylinders or tanks.

Improved Sustainability for Your Operations

For companies pursuing sustainability goals or environmental certifications, reducing your nitrogen supply chain footprint can make a measurable difference. On-site nitrogen generation supports greener operations by minimizing fuel use, cutting greenhouse gas emissions, and lowering the embodied energy in every cubic foot of nitrogen you consume.

Long-Term Cost and Environmental Benefits

Beyond environmental gains, on-site nitrogen generation typically lowers operating costs over time. By eliminating recurring delivery fees, rental charges, and cylinder management, your company can reduce expenses while advancing its sustainability commitments. The investment in an on-site generator pays off both financially and environmentally.

Contact On Site Gas Systems Today for Your N₂ Generator Needs!

Ready to reduce your environmental impact while ensuring a consistent, high-purity nitrogen supply? Contact On Site Gas Systems today to explore on-site nitrogen generation solutions tailored to your operations. Our team can help you design and install a system that supports your sustainability goals and provides a dependable, cost-effective nitrogen source for years to come.

SPEC YOUR SYSTEM TALK TO AN EXPERT CONTACT US
/0 Comments/by

What Is a Nitrogen Generation System and How Does It Work?

Across many industrial, manufacturing, food, and research applications, a nitrogen generation system is a backbone utility: it delivers a continuous supply of nitrogen gas exactly on-site, on-demand. Whether you’re preserving freshness in packaging, maintaining inert atmospheres for welding or brazing, or ensuring safety in oxygen-sensitive processes, using an in-house nitrogen generation system can offer reliability and cost savings that bottled or delivered gas often cannot match.

In this article, we’ll explain what a nitrogen generation system is, explore how nitrogen generation systems work, and show you the main types and benefits of installing one.

What Is a Nitrogen Generation System?

A nitrogen generation system (also called a nitrogen generator) is a setup that extracts nitrogen gas from the ambient air, purifies it to a required purity level, and delivers it for use in-house. Instead of ordering nitrogen in cylinders or bulk deliveries, the system makes nitrogen continuously at your facility, customized to your usage rate and purity needs.

Key components typically include a source of compressed air, filters and dryers to remove moisture, particulates, and oil, the separation module where nitrogen is isolated, and controls, safety features, and sometimes storage or buffer tanks.

How Does a Nitrogen Generator Work?

There are multiple technologies for separation, and each nitrogen generation system might use one or more different methods depending on required purity, flow rate, pressure, and cost. Two of the most common technologies are PSA (Pressure Swing Adsorption) and membrane separation.

PSA systems pass compressed air through vessels filled with an adsorbent like carbon molecular sieve. Oxygen, along with CO₂ and water vapor, is adsorbed under high pressure while nitrogen passes through. The pressure is then released so the adsorbent regenerates, and the cycle alternates between two or more vessels to provide continuous output. PSA can deliver very high purity levels, often exceeding 99%.

Membrane systems push compressed air through a membrane that allows oxygen and water vapor to pass through faster than nitrogen. The slower nitrogen flow is collected as product gas. While membrane systems typically achieve 95–99% purity, this is often sufficient for many industrial applications.

Here is a step-by-step summary of how a typical PSA nitrogen generation system works:

  1. Air intake & compression – Ambient air is drawn in and compressed to a target pressure.
  2. Pre-treatment – Filtration, drying, and cooling remove moisture, oil, dust, and CO₂.
  3. Adsorption – Cleaned, compressed air enters a vessel filled with carbon molecular sieve. Oxygen and other unwanted components are captured while nitrogen passes through as the product.
  4. Switching / Desorption – Once the adsorbent becomes saturated with oxygen, the system directs air to another vessel while the saturated vessel regenerates by reducing pressure, releasing the oxygen.
  5. Purity control & buffering – Sensors monitor nitrogen purity, and buffer tanks or storage smooth out fluctuations in demand.
  6. Delivery – Purified nitrogen is delivered to the point of use or stored if needed.

Types of Nitrogen Generation Systems

Different configurations suit different needs. Options include turnkey PSA generator systems, membrane nitrogen generators for lower-purity applications, custom engineered systems for unique requirements, containerized or modular systems for portable operations, and cylinder-filling systems for facilities that want to fill their own nitrogen cylinders.

Why Choose a Nitrogen Generation System?

Key benefits include cost savings compared to bottled or bulk nitrogen, supply reliability with independence from delivery schedules, the ability to set and maintain exact purity levels, and operational flexibility to match changing demand. Additional advantages include fewer safety and handling risks and a reduced environmental footprint thanks to less transportation and packaging waste.

Contact On Site Gas Systems For Your Nitrogen Gas Needs!

Ready to bring the benefits of on-site nitrogen generation to your operation? Contact On Site Gas Systems today to discuss your specific N₂ generator needs. Our team will help you evaluate your nitrogen requirements, recommend the right system for your application, and guide you through every step—from design and installation to ongoing support—so you can enjoy a reliable, cost-effective supply of high-purity nitrogen on demand.

SPEC YOUR SYSTEM TALK TO AN EXPERT CONTACT US
/0 Comments/by

Energy Efficiency in Nitrogen Generation: Tips and Technologies

For industries that rely on a steady supply of nitrogen, on-site nitrogen generation is already a game-changer. It reduces dependency on gas deliveries, lowers long-term costs, and ensures an uninterrupted nitrogen supply. But there’s another benefit that’s just as critical: energy efficiency.

With rising energy costs and increased focus on sustainability, businesses are seeking smarter ways to produce nitrogen without driving up operational expenses. The good news is that modern nitrogen generation technologies are designed to maximize efficiency while maintaining purity and performance.

Why Energy Efficiency Matters in Nitrogen Generation

Operating a nitrogen generator around the clock can be energy-intensive if not properly optimized. Inefficient systems waste electricity, increase carbon footprints, and raise overall operating costs. For facilities where nitrogen is critical—such as food packaging, electronics, metal fabrication, and healthcare—improving energy efficiency has a direct impact on both profitability and sustainability goals.

Energy-Efficient Nitrogen Generation Technologies

The latest advancements in on-site nitrogen generators focus on lowering energy use without sacrificing gas purity. Here are some key technologies:

  • PSA (Pressure Swing Adsorption) Optimization
     PSA nitrogen generators can be designed with advanced adsorption materials that increase nitrogen yield per cycle, reducing the energy required for each cubic foot of nitrogen produced.
  • Membrane Separation Systems
     Membrane nitrogen generators operate without moving parts, making them inherently more energy-efficient for applications that require moderate purity levels.
  • Variable-Speed Compressors
     By adjusting output to match demand, variable-speed air compressors prevent unnecessary energy consumption during low-usage periods.
  • Smart Monitoring & Controls
     Integrated sensors and automated controls ensure nitrogen production is aligned with real-time demand, avoiding overproduction and wasted energy.

Practical Tips for Improving Nitrogen Generation Efficiency

Even the most advanced technology benefits from best practices. Facilities can boost energy efficiency with these steps:

  • Regular Maintenance – Clean filters, check valves, and service compressors to ensure the system operates at peak performance.
  • Right-Sizing the System – Choose a nitrogen generator that matches your actual consumption. Oversized systems waste energy by producing excess gas.
  • Optimize Purity Levels – Higher purity requires more energy. Select the purity level your application truly needs—no more, no less.
  • Heat Recovery – Reclaim waste heat from compressors and reuse it for facility heating or other processes.
  • Leak Detection – Even small air leaks in the system force compressors to work harder, wasting energy. Regular leak audits keep efficiency high.

The Long-Term Payoff of Energy Efficiency

Investing in energy-efficient nitrogen generation technologies doesn’t just save on utility bills—it extends equipment life, lowers maintenance costs, and helps businesses meet sustainability targets. Over time, these savings can be substantial, improving ROI while reducing environmental impact.

Why Choose On Site Gas for Efficient Nitrogen Generation?

At On Site Gas, we design and build nitrogen generation systems with efficiency in mind. Whether you need a membrane system for lower purity applications or a high-purity PSA nitrogen generator, our solutions are engineered to deliver maximum output with minimal energy waste. Our experts also work with you to optimize your system for your facility’s unique demand, ensuring you get the best balance of performance, cost savings, and sustainability.

Final Thoughts

Energy efficiency is no longer optional—it’s essential. By adopting advanced nitrogen generation technologies and following energy-saving best practices, businesses can lower costs, reduce emissions, and ensure reliable nitrogen supply. With On Site Gas as your partner, efficiency and performance go hand-in-hand.

SPEC YOUR SYSTEM TALK TO AN EXPERT CONTACT US
/0 Comments/by

Why Nitrogen Is the Go-To Gas for Fire Prevention and Safety Systems

When it comes to protecting lives and property, fire prevention systems need to be reliable, effective, and long-lasting. While water-based fire sprinkler systems are the most common line of defense, a growing number of facilities are turning to nitrogen generators for fire protection as a smarter, more dependable solution. But why nitrogen? Let’s explore why this inert gas has become the go-to choice for fire safety systems worldwide.

The Problem with Oxygen in Fire Sprinkler Systems

Fire sprinkler systems that rely solely on compressed air or oxygen face a serious challenge: corrosion. Oxygen inside piping reacts with the water present in fire sprinkler systems, causing rust and deterioration over time. This leads to leaks, blockages, and even total system failure—putting both people and property at risk.

This is where nitrogen comes in.

Why Nitrogen Is Ideal for Fire Protection

Nitrogen, which makes up about 78% of the air we breathe, is an inert gas—meaning it doesn’t support combustion or cause corrosion. By introducing nitrogen into fire sprinkler systems, facility managers can:

  • Reduce corrosion – Nitrogen eliminates oxygen, preventing rust from forming inside steel pipes.
  • Extend system life – Fire sprinkler systems last significantly longer when paired with a nitrogen generator for fire protection.
  • Prevent costly leaks – Fewer pipe failures mean fewer expensive repairs and replacements.
  • Enhance safety – A dependable system ensures sprinklers work exactly when they’re needed.

Nitrogen Generators for Fire Sprinkler Systems

A fire protection nitrogen generator delivers a continuous, on-site supply of high-purity nitrogen to fire sprinkler systems. Unlike compressed gas cylinders, which require constant refills and logistical challenges, an on-site generator produces nitrogen on demand.

With a nitrogen generator for fire sprinkler systems, you get:

  • Consistent purity levels that keep oxygen out of your piping.
  • A cost-effective, long-term solution with minimal maintenance.
  • Peace of mind knowing your fire protection system is always ready.

Applications Across Industries

Nitrogen-based fire prevention systems are increasingly used in:

  • Commercial buildings – Protecting critical infrastructure and office environments.
  • Warehouses & logistics centers – Reducing downtime and damage from leaks or failures.
  • Healthcare facilities – Where reliability and safety are absolutely non-negotiable.
  • Data centers – Protecting sensitive electronic equipment where corrosion could be devastating.

Why Choose On Site Gas for Fire Protection Nitrogen Generators?

At On Site Gas, we’ve been engineering advanced nitrogen generation systems for over 35 years. Our nitrogen generators for fire protection are trusted across industries because they are:

  • Custom-engineered to fit your system requirements.
  • Reliable with continuous nitrogen supply, 24/7.
  • Cost-effective by eliminating cylinder deliveries and extending system life.

When it comes to safeguarding your people, property, and business, nitrogen is the clear choice—and an on-site nitrogen generator makes it easier than ever to ensure your fire protection system remains strong, safe, and dependable.

Choose On Site Gas Systems For Fire Protection Nitrogen Generators

Fire prevention is too important to leave to chance. By eliminating corrosion and ensuring long-lasting performance, a nitrogen generator fire protection system provides unmatched reliability. Whether you’re managing a warehouse, hospital, or office building, nitrogen is the go-to gas for safety—and On Site Gas is here to provide the solution.

SPEC YOUR SYSTEM TALK TO AN EXPERT CONTACT US
/0 Comments/by

Why More Facilities Are Investing in On-Site Nitrogen Plants

Across industries, facility managers are rethinking how they source industrial gases—and for good reason. On-site nitrogen generation is becoming the preferred choice over traditional bulk delivery, thanks to its cost savings, operational efficiency, and independence from supply chain volatility. And now, with the recent passage of The One Big Beautiful Bill, investing in on-site nitrogen generation is even more financially attractive.

This new legislation restores full bonus depreciation, allowing businesses to deduct the entire cost of qualifying equipment—like nitrogen generators—in the same year it’s placed into service.

100% Bonus Depreciation Is Back

Signed into law on July 4, 2025, The One Big Beautiful Bill reinstates 100% bonus depreciation for qualified property acquired after January 19, 2025, and placed into service before January 1, 2030. That means companies can now fully expense the cost of capital equipment—including on-site nitrogen generation systems—in the year they’re installed and operational.

This powerful tax incentive enables facilities to accelerate ROI and strengthen their bottom line, especially when paired with the long-term operational savings that nitrogen generation provides.

The Financial Case for On-Site Nitrogen Generation

Even without tax incentives, on-site nitrogen plants offer significant financial and operational advantages:

  • Eliminate recurring delivery fees and rental costs associated with bulk nitrogen
  • Avoid volatile pricing and third-party supply disruptions
  • Reduce nitrogen waste by producing only what you need, when you need it
  • Lower your carbon footprint by eliminating nitrogen delivery truck emissions

With 100% bonus depreciation now in effect, these long-term benefits are supported by immediate tax relief—making the financial case for on-site nitrogen generation stronger than ever.

Why 2025 Is the Right Time to Invest

If your facility has been considering the shift to on-site nitrogen generation, now is an ideal time to act. By investing in equipment this year, you can:

  • Take full advantage of 100% bonus depreciation
  • Improve operational efficiency and reduce costs
  • Gain long-term independence from gas suppliers
  • Strengthen your facility’s supply chain resilience

At On Site Gas Systems, we design and build nitrogen generation systems right here in the USA, backed by more than 35 years of experience and supported by a nationwide service team.

Get Started with On Site Gas Systems

With the passage of The One Big Beautiful Bill, on-site nitrogen plants are now not just an operational upgrade—they’re a strategic financial decision. If you’re ready to explore your options and take advantage of this new tax opportunity, contact us today. We’ll help you design the right nitrogen solution for your facility, with custom options, fast turnaround, and dedicated support.

SPEC YOUR SYSTEM TALK TO AN EXPERT CONTACT US
/0 Comments/by

Why Buy USA-Built Nitrogen Gas Generators?

When investing in nitrogen gas generation systems, choosing USA-made nitrogen generators, N2 generators made in the USA, or nitrogen generators made in the USA delivers unmatched reliability, performance, and value. At On Site Gas Systems, we build our systems in the U.S.A., and here’s why that matters—especially in today’s tariff-sensitive trade environment.

1. Cost Savings and Tariff Protection

Because our systems are manufactured domestically, they are not subject to import duties or unpredictable tariff spikes on foreign-made gas generator equipment. Recent U.S. tariffs on imported industrial equipment have significantly increased the cost of sourcing from overseas. By choosing a provider based in the U.S., you protect your investment against these added expenses and gain more control over your total project budget.

2. Quality, Compliance, and Craftsmanship

USA-made nitrogen generators are built to high engineering and safety standards, often exceeding global benchmarks. All On Site Gas Systems equipment is produced in our ISO-certified facility, ensuring it meets rigorous quality, safety, and regulatory requirements. Whether your business operates in food packaging, electronics, pharmaceuticals, or manufacturing, you can trust that your system is compliant and built to last.

3. Faster Delivery and Fewer Delays

International supply chains continue to face challenges that can lead to customs delays, extended lead times, and logistical uncertainty. Choosing N2 generators made in the USA eliminates these issues, offering faster delivery and predictable turnaround. This minimizes disruption to your production schedule and allows you to get your system up and running sooner.

4. Local Support and Maintenance

When your generator is manufactured in the U.S., you’re backed by local customer service, technical support, and readily available spare parts. This level of access and responsiveness significantly reduces downtime and keeps your system operating at peak performance. At On Site Gas Systems, our U.S.-based support teams are here when you need them—whether it’s during installation, troubleshooting, or regular maintenance.

5. Economic and Supply Chain Resilience

Choosing nitrogen generators made in the USA also contributes to domestic manufacturing, supports skilled labor, and reduces reliance on unstable foreign supply chains. With evolving global trade policies and tariff risks, working with a U.S. manufacturer provides long-term supply chain resilience and business continuity.

The Bottom Line

With global tariffs increasing the cost of imported industrial equipment and creating supply chain instability, choosing a nitrogen generator made in the USA is a smart, strategic decision. You’ll gain greater control over costs, reduce lead times, and enjoy responsive support—all without compromising on quality.

If you’re ready to explore a reliable, USA-built nitrogen solution, contact On Site Gas Systems today. We’ll help you find or customize the right system for your needs—built to last, made in the USA, and supported every step of the way.

SPEC YOUR SYSTEM TALK TO AN EXPERT CONTACT US
/0 Comments/by

Avoiding Downtime: How a Nitrogen or Oxygen Generator made in the USA Protects Your Supply Chain

In today’s fast-paced and highly competitive manufacturing and industrial landscape, downtime is more than an inconvenience—it’s a direct threat to your bottom line. Whether you’re in food packaging, pharmaceuticals, electronics, or metal fabrication, consistent access to high-purity gases like nitrogen and oxygen is vital. This is where an on-site gas generation system that is manufactured in the USA proves to be a game-changer.

At On Site Gas Systems, we understand how important it is to maintain operational continuity. Let’s explore how switching to domestic gas systems can safeguard your supply chain and eliminate costly interruptions.

The High Cost of Downtime

When your production line stops due to a delay in gas deliveries or depleted supply, the ripple effects can be devastating:

  • Missed deadlines and customer dissatisfaction
  • Idle labor and wasted materials
  • Halted downstream operations
  • Increased overhead costs

If you rely on bulk deliveries or cylinders from external gas suppliers, your supply chain is vulnerable to factors outside of your control—weather delays, transportation issues, or even international disruptions.

On Site Gas Systems: A Reliable Solution

On-site nitrogen and oxygen generators allow you to produce the gases you need, exactly when you need them. No trucks. No waiting. No runouts. This dramatically reduces the risk of downtime caused by external supply chain failures.

Here’s how our N2 and O2 gas systems protect your operations:

Uninterrupted Gas Supply

Producing your own gas ensures constant availability. Our PSA (Pressure Swing Adsorption) and membrane nitrogen generators operate 24/7, giving you full control over your production schedule.

Eliminates Delivery Dependence

When you’re not waiting on third-party deliveries, you’re protected from shipping delays, fuel price spikes, and shortages that can disrupt traditional supply chains.

Scalable for Demand Fluctuations

Our systems can be tailored to your exact output requirements—and expanded as your business grows. Whether your gas needs increase seasonally or suddenly spike, on-site systems can adapt quickly.

Improved Safety and Compliance

Cylinder storage and handling introduce hazards and regulatory burdens. Domestic systems eliminate the need to store high-pressure cylinders or bulk liquid tanks on site.

Cost Predictability

By eliminating delivery fees, rental charges, and fluctuating supplier costs, your budget becomes more predictable—and your ROI improves year over year.

Protect Your Supply Chain With On Site Gas

At On Site Gas Systems, we’ve spent over 30 years helping companies around the world take control of their gas supply. Our turnkey nitrogen and oxygen generators are built in the USA and trusted in critical industries ranging from aerospace to agriculture.

We’ll help you design a customized system that keeps your production online, protects your margins, and ensures you’re never at the mercy of the next delivery truck.

Ready to eliminate downtime from your gas supply chain?

Contact On Site Gas Systems today for a free consultation and discover how on-site generation can transform your operations.

SPEC YOUR SYSTEM TALK TO AN EXPERT CONTACT US
/0 Comments/by

Built in the USA: A Behind-the-Scenes Look at Our Manufacturing Process

Why U.S. Manufacturing Matters

When reliability is critical to your operations, you want to know exactly where and how your equipment is built. At On Site Gas Systems, we’re proud to manufacture our nitrogen and oxygen generators right here in the USA. From design to final testing, everything we do is centered on quality, speed, and long-term reliability.

Being transparent about how our generators are made helps build the kind of trust our industrial partners expect. This behind-the-scenes look gives you a closer view into our production process and what makes our American-made systems different.

Where It All Begins: Our U.S.-Based Facility

All of our systems are manufactured at our fully integrated facility in the United States. Engineering, fabrication, assembly, and testing all happen under one roof, which means tighter quality control and faster turnaround times.

Our centralized approach eliminates unnecessary delays and gives our team complete control over each build. This is how we ensure that every oxygen and nitrogen generator leaving our facility meets the highest standards. Our facilities and quality management systems are ISO certified. 

Precision Engineering: Designing Custom Gas Generation Systems

Every project starts with a conversation. 

Our engineering team works directly with your business to understand your application—flow rate, pressure, purity, and usage demands.

From there, we move into system design. Our team builds solutions tailored to your exact needs, utilizing proven PSA and membrane technology. This collaborative design process ensures each unit performs as expected, with no overbuilt or underperforming components. 

This is the foundation of how nitrogen generators are made USA-style—custom, smart, and built to last.

Fabrication and Assembly: Craftsmanship You Can Count On

After engineering approval, we move to fabrication and assembly. We use high-quality materials sourced and fabricated right here in the U.S. Our skilled technicians and engineers build and test every system—whether it’s a PSA oxygen generator, a PSA nitrogen system, or a membrane nitrogen unit.

Precision and durability are key. Everything is built in alignment with U.S. safety and performance standards, ensuring a reliable operation for years to come. If you’re wondering how oxygen generators are made USA-based, this is where our reputation for dependability begins—at the hands of experienced professionals on American soil.

Shipping and Support: From Our Facility to Your Facility

Once your generator is ready, it’s shipped directly from our U.S. facility. No overseas delays. No customs hold-ups. That means you get your equipment faster, get it installed sooner, and start producing gas without waiting around.

In fact, U.S. manufacturers deliver products up to 50% faster on average compared to overseas suppliers, thanks to shorter lead times and streamlined logistics.

And we’re not just shipping and forgetting. As one of the most trusted N2 and O2 manufacturers in the USA, we offer long-term service and support from our U.S.-based team—people who know your system and are available when you need them.

Built to Last, Built in the USA

For over 35 years, our U.S.-based manufacturing operation has grown alongside the industries we serve. From healthcare and defense to food processing and aerospace, we’ve expanded our capabilities to meet evolving demands—without sacrificing quality or lead time.

As one of the most established N2 manufacturers in the USA, we’ve helped critical industries reduce dependence on imported systems while gaining more control over supply, service, and system performance. Because we build every system domestically, we’re able to maintain consistent standards, adapt to changing customer needs, and provide faster, more reliable delivery and support. Our customers are investing in equipment that’s backed by decades of U.S. engineering experience and a support team that stands behind every order.

When you choose a nitrogen or oxygen generator made in the USA, you’re setting your operation up for long-term success with a partner that grows with you.

Proudly Built by On Site Gas Systems

Every system we build reflects our commitment to quality, speed, and dependability. From engineering to installation, everything happens right here in the U.S. It’s how we deliver consistent performance and long-term value—without the risks of overseas production.

Looking for a custom-built nitrogen or oxygen generator system backed by U.S. support? Check out our nitrogen generator systems and oxygen generator systems to see what we offer.

Ready to see the difference? Request a custom quote today!

SPEC YOUR SYSTEM TALK TO AN EXPERT CONTACT US
/0 Comments/by

Why U.S. Manufacturing Matters More Than Ever for Nitrogen & Oxygen Systems

A Critical Moment for Industrial Gas Solutions

Industrial gas needs are growing fast—and so are the challenges. Whether you’re managing a food packaging plant, medical facility, or aerospace operation, a steady supply of nitrogen (N₂) or oxygen (O₂) is critical to your process. But between global supply chain issues, unpredictable shipping timelines, and rising import costs, relying on overseas equipment has become a serious risk.

Now more than ever, where your gas generation system is made matters. Let’s look at why U.S.-manufactured nitrogen and oxygen systems are becoming the go-to solution for operations like yours.

The Case for On-Site Generation: Nitrogen & Oxygen on Demand

On-site gas generation systems offer a clear advantage over delivered gas. You’re not at the mercy of suppliers, scheduling delays, or changing delivery fees. Instead, you produce nitrogen or oxygen as needed, right at your facility.

With On Site Gas Systems’ nitrogen generator systems, you can choose between PSA and membrane technology—each built to match your required purity, flow rate, and usage pattern. The same goes for our oxygen generator systems, which provide dependable, on-demand oxygen production without the cost or complexity of gas deliveries.

These systems are already trusted by a wide range of industries:

  • Food processing and packaging
  • Medical and healthcare facilities
  • Aerospace and electronics
  • Metal fabrication and manufacturing 

Choosing American-made oxygen generators or nitrogen systems means you’re in control—day in and day out.

Made in the USA: Quality, Reliability, and Speed

Quality starts with manufacturing. U.S.-based production gives On Site Gas Systems a major advantage in delivering reliable, high-performance equipment. Every system is engineered, assembled, and tested under tight quality control in our U.S. facility.

That means faster turnaround times and tighter performance standards. Need a custom nitrogen system for a food packaging line on short notice? We’ve done that. Because we’re building your system here at home, we can move faster—without being held up by overseas production delays.

Supply Chain Resilience Starts at Home

Importing critical equipment comes with a long list of risks—delays at ports, changing tariffs, and fluctuating foreign regulations, just to name a few. With an American made nitrogen generator, you’re protected from many of those problems.

Additionally, when you need replacement parts or service components, you won’t have to wait weeks or months. We maintain a full inventory of parts right here in the U.S., giving your team the ability to keep systems running smoothly without delay.

Personalized Service and U.S.-Based Support

When something breaks, when you need an adjustment, or when it’s time for training, local support makes a big difference. On Site Gas Systems provides U.S.-based service and support with knowledgeable engineers who understand your system inside and out.

From the initial setup to long-term maintenance, we provide:

  • Installation guidance and on-site training
  • Direct access to our U.S. support team
  • Ongoing maintenance programs tailored to your facility 

Our focus is on building long-term relationships and keeping your system running efficiently for years to come.

Choose U.S. Manufacturing. Choose On Site Gas.

When you choose U.S.-manufactured nitrogen systems or American-made oxygen generators, you’re choosing reliability, faster service, and real support from a partner that understands your needs.

On Site Gas Systems is proud to build high-purity nitrogen and oxygen systems right here in the U.S.—delivering cost-effective, efficient solutions that help your business stay ahead.

Let’s talk about your gas generation needs. Contact us today to request a custom quote or speak with a U.S.-based engineer.

SPEC YOUR SYSTEM TALK TO AN EXPERT CONTACT US
/0 Comments/by